HELI SAFETY NET : MANUAL TYPE
![](http://forship.godohosting.com/wp-content/uploads/2019/09/PD1-1.png)
![](http://forship.godohosting.com/wp-content/uploads/2019/09/PD1-2.png)
![](http://forship.godohosting.com/wp-content/uploads/2019/09/PD1-3.png)
![](http://forship.godohosting.com/wp-content/uploads/2019/09/PD1-DWG.png)
PD1-1
PD1-2
PD1-3
PD1-DWG
![PD1-1](http://forship.godohosting.com/wp-content/uploads/2019/09/PD1-1.png)
![PD1-2](http://forship.godohosting.com/wp-content/uploads/2019/09/PD1-2.png)
![PD1-3](http://forship.godohosting.com/wp-content/uploads/2019/09/PD1-3.png)
![PD1-DWG](http://forship.godohosting.com/wp-content/uploads/2019/09/PD1-DWG.png)
![Shadow](http://forship.godohosting.com/wp-content/plugins/smart-slider-3/Public/SmartSlider3/Widget/Shadow/ShadowImage/Assets/shadow/dark.png)
Type / Specification
Manual type
Typical material
Steel : For general use
GRP : For RCS reduction
Approx. Size
W1500 x H1100 (mm)
(Depends on deck size)
Approx. Weight
40 kg/unit
Product Overview
Manual type safety nets are installed on the flight deck and used as a fence to prevent falls in daily operations, and these safety nets are laid down by the crew during helicopter take-off and landing so that they do not interfere with the take-off and landing of the helicopter.
The material of the frame can be made from a steel or GRP as required. GRP is used to reduce radar cross section.